APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Includes: CAN Port Terminator, Installation guide, Rack Mounting brackets, Safety guide, Sample locking IEC power cord, Serial configuration cable

Specification

Product
Product id	363659
Brand	American Power Conversion
Partnr	AP8653
EAN/UPC code	731304276982
Warranty (months)	24 months
Design
PDU types	Metered, Switched
Type	Single-phase
Rack capacity	0U
Mounting	Vertical
Ports & interfaces
AC outlets quantity	24 AC-uitgang(en)
Power plug	IEC309
AC outlet types	C13 coupler, C19 coupler
Management features
Monitoring	Current, Power, Voltage
Outlet control	Lock-out, Recycle, Turn off, Turn on
Power
Nominal output voltage	230 V
AC input frequency	50 - 60 Hz
Maximum current	32 A
Load capacity	7680 VA
Power protection features	Overload
Maximum power	7680 W
Weight & dimensions
Dimensions (WxDxH)	56.00 x 51.00 x 1829.00 mm
Weight	8230 g
Package dimensions (WxDxH)	162.00 x 118.00 x 2038.00 mm
Package weight	10500 g
Technical details
Nominal input voltage	230 V
Sustainability certificates	RoHS
Cable length	3 m
Maximum input current per phase	32 A
Maximum total current draw per phase	32 A
Certification	EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, VDE
Product colour	Black
Operational conditions
Operating temperature (T-T)	-5 - 45 °C
Storage temperature (T-T)	-25 - 65 °C
Operating relative humidity (H-H)	5 - 95 procent
Storage relative humidity (H-H)	5 - 95 procent
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m