High density, double-conversion on-line power protection with scalable runtime
Includes: CD with software, Comms cable, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime
Allows additional run time to be quickly added as needed.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial connectivity
Provides management of the UPS via a serial port.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

SmartSlot
Customize UPS capabilities with management cards.

Network manageable
Provides remote power management of the UPS over the network.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable
Provides temporary battery power when the utility power is out.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Specification

Product
Product id	648492
Brand	American Power Conversion
Partnr	SRT1000XLI
EAN/UPC code	731304340270
Warranty (months)	3 years
Power
Input frequency	40/70 Hz
Technical details
Sustainability compliance	Y
Sustainability certificates	RoHS
Harmonized System (HS) code	85078000
Features
UPS topology	Double-conversion (Online)
Output power capacity	1000 VA
Output power	1000 W
Waveform	Sine
Input operation voltage (min)	50 V
Input operation voltage (max)	150 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Output frequency	50/60 Hz
Surge energy rating	432 J
Crest factor	3:1
ECO mode	Y
Emergency Power Off (EPO)	Y
Output voltage Total Harmonic Distortion (THD)	2 procent
Noise level	50 dB
Audible alarm(s)	Y
Audible alarm modes	Alarm when on battery, Battery replacement
Auto-restart	Y
Ports & interfaces
AC outlet types	C13 coupler
Power plug	C14 coupler
AC outlets quantity	12 AC-uitgang(en)
USB port	Y
Serial interface	Y
Serial interface type	RJ-45
Serial ports quantity	1
SmartSlot	Y
Battery
Battery technology	Sealed Lead Acid (VRLA)
Battery voltage	48 V
Typical backup time at full load	8 min
Typical backup time at half load	21 min
Battery life (max)	5 jaar
Battery recharge time	3 uur
Hot-swap battery	Y
Automatic battery test	Y
Cold start	Y
Design
Form factor	Tower
Product colour	Black
Rack capacity	2U
Cable length	1.83 m
Cooling type	Active
Built-in fan	Y
LED indicators	Status
International Protection (IP) code	IP20
Display type	LCD
Display	LCD
Certification	CE, EAC
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 procent
Storage relative humidity (H-H)	0 - 95 procent
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 15240 m
Packaging data
Cables included	USB cable
Manual	Y
Quick installation guide	Y
Package width	594 mm
Package depth	749 mm
Package height	246 mm
Package weight	29600 g
Weight & dimensions
Width	85 mm
Depth	505 mm
Height	432 mm
Weight	20500 g
Battery width	594 mm
Battery depth	749 mm
Battery height	246 mm
Battery weight	29600 g
Logistics data
Quantity per pallet	12 stuk(s)
Other features
Nominal input voltage	230 V
Nominal output voltage	230 V