The Allied Telesis IE210L Series of Industrial-Lite Ethernet Gigabit Layer 2 switches are built for enduring performance at high ambient temperatures, making them ideal for indoor IoT applications and physical security.

The Allied Telesis IE210L Series are wire-speed Layer 2 switches for industrial-lite Ethernet applications. With Power over Ethernet Plus (PoE+), and support for high operating temperatures of up to 65°C, IE210L switches tolerate the harsh and demanding environments found in industrial deployments.

These high-performing, cost-effective switches provide network managers with several key features, including port-based VLANs, IEEE 802.1p, QoS, port trunking/link aggregation, port mirroring, priority queues, and IEEE 802.1x security support.

With support for up to 16K MAC addresses, the IE210L Series is the ideal option for integrating management into any network solution.

Device management is provided via an industry-standard CLI, web-based Graphical User Interface (GUI), SNMP, Telnet and SSH, as well as the Allied Telesis Autonomous Management Framework™ (AMF).

Powerful network management
AMF meets the increased management requirements of modern converged networks, automating many everyday tasks including configuration management. AMF has powerful centralized management features that manage a complete network as a single virtual device. The network can be expanded with plug-and-play simplicity, and network node recovery is fully zero-touch. AMF secure mode increases network security with management traffic encryption, authorization, and monitoring. AMF Guestnode allows third-party devices, such as security cameras, to be part of an AMF network.

Secure
Network security is guaranteed, with powerful control over network traffic types, secure management options, and other multi-layered security features built right into the IE210L.

Network Access Control (NAC) gives unprecedented control over user access to the network, in order to mitigate threats to network infrastructure.

Allied Telesis IE210L switches use 802.1x port-based authentication, in partnership with standards-compliant dynamic VLAN assignment, to assess a user’s adherence to network security policies and either grant access or offer remediation. Tri-authentication ensures the network is only accessed by known users and devices, while secure access is also available for guests.

Security from malicious network attacks is provided by a comprehensive range of features, such as DHCP snooping, STP root guard, BPDU protection and Access Control Lists (ACLs). Each of these can be configured to perform a variety of actions upon detection of a suspected attack.

Network protection
Advanced storm protection features include bandwidth limiting, policy-based storm protection and packet storm protection.

Network storms are often caused by cabling errors that result in a network loop. IE210L switches provide features to detect loops as soon as they are created. Loop detection and thrash limiting take immediate action to prevent network storms.

Network resiliency
The convergence of network services in the Enterprise has led to increasing demand for highly-available networks with minimal downtime. The IE210L Series supports highly-stable and reliable network switching with a recovery time of less than 50ms.

You can customize the IE210L with the most appropriate mechanism and protocol to prevent network connection failure. Choices include Allied Telesis Ethernet Protection Switched Ring (EPSRing™), and the standard ITU-T G.8032.

Future-proof
The IE210L switches are Software-Defined Networking (SDN) ready and are able to support OpenFlow v1.3.

Specification

Product
Product id	629323
Brand	Allied Telesis
Partnr	AT-IE210L-10GP-60
EAN/UPC code	767035214443
Warranty (months)	2 + 3 year
Data transmission
MAC address table	16000 entries
Switching capacity	20 Gbit/s
Forwarding rate	14.9 Mpps
Latency (10-100 Mbps)	55 µs
Latency (1 Gbps)	7.8 µs
Latency (10 Gbps)	3.4 µs
Number of queues	8
Static route	Y
Jumbo frames support	Y
Jumbo frames	10000
Network
Networking standards	IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1v, IEEE 802.2, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support	N
Copper ethernet cabling technology	10BASE-T, 100BASE-FX, 100BASE-T, 1000BASE-LX, 1000BASE-SX, 1000BASE-T
Port mirroring	Y
Policy-based routing	Y
Full duplex	Y
Flow control support	Y
Spanning tree protocol	Y
Link aggregation	Y
VLAN support	Y
Virtual LAN features	Policy-based VLAN, VLAN Identifier ( VLAN ID)
Number of VLANs	2048
Management features
Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Y
Web-based management	Y
Configuring Location Settings (CLI)	Y
ARP inspection	Y
Traffic classification	Y
System event log	Y
MIB support	Comprehensive SNMP
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity	8
SFP module slots quantity	2
Power connector	AC-in jack
Security
DHCP features	DHCP client, DHCP relay, DHCP server, DHCP snooping, DHCPv6 client, DHCPv6 relay
Access Control List (ACL)	Y
IGMP snooping	Y
MAC address entries	Blackhole MAC address entries
Authentication type	IEEE 802.1x, Network Access Control (NAC), RADIUS
Security algorithms	802.1x RADIUS, HTTPS, MD5, PEAP, SSH, SSH-2, SSL/TLS, TTLS
MAC address filtering	Y
SSH/SSL support	Y
Loop protection	Y
BPDU filtering/protection	Y
Authentication	MAC-based authentication, Port-based authentication, Web-based authentication
Weight & dimensions
Width	210 mm
Depth	275 mm
Height	42.5 mm
Weight	2100 g
Packaging data
Package weight	3450 g
Package width	430 mm
Package depth	360 mm
Package height	150 mm
Power
Power supply included	Y
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Input current	2.4 A
Power consumption (max)	16 W
Multicast features
Multicast support	Y
Multicast MAC address table	512 entries
Multicast Listener Discovery (MLD) snooping	MLDv1 and v2
Design
Rack mounting	Y
Stackable	Y
Product colour	Grey
LED indicators	Y
Electromagnetic compatibility	EN55032 class A, FCC class A, VCCI class A, ICES-003 class A, EN55024, EN61000-3-2 (harmonic), EN61000-3-3 (flicker)
Certification	UL, cUL, UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1
Operational conditions
Operating altitude	0 - 3048 m
Heat dissipation	128 BTU/h
Storage temperature (T-T)	-30 - 70 °C
Storage relative humidity (H-H)	5 - 95 procent
Operating temperature (T-T)	0 - 65 °C
Operating relative humidity (H-H)	5 - 95 procent
Performance
Memory type	DDR3-SDRAM
Internal memory	512 MB
Flash memory	128 MB
Noise level	33 dB
Harmonized System (HS) code	8517.62.0050
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Y
Power over Ethernet (PoE) ports quantity	8
Power over Ethernet plus (PoE+) ports quantity	4
Power over Ethernet (PoE) power per port	15 W
Total Power over Ethernet (PoE) budget	124 W