The HDMI® HDBaseT + USB-B to A and RS232 over Cat Extender (18Gbps) allows for the extension of a 4K HDMI source up to 328ft to a 4K display without signal loss using a single Cat6a Ethernet cable. This is an ideal solution where USB must also be extended alongside HDMI video and audio to interactive whiteboards and displays or in any installation that goes far beyond the length limitations of standard HDMI and USB cabling.

This HDMI HDBaseT 3.0 kit supports 5Play features, including the combined delivery of uncompressed ultra-high-definition digital video and audio, Ethernet, control signals, USB 2.0, and up to 100W of power through a single, 100m/328ft Cat6a LAN cable. The uncompressed digital video fully supports 4K 60Hz (4:4:4) HDMI signals and all audio formats in the HDMI 2.0 specification. The Ethernet pass-through transmits 1GB of data. The featured dip switch allows for RS232 pass-through and the added convenience of field firmware updating. USB 2.0 supports streaming cameras, connected peripherals, and storage devices. With one-way Power over HDBaseT (PoH) support, one power adapter connected to the receiver powers both the transmitter and receiver, so no additional power adapter required, allowing for greater flexibility in installations.

Note: Ensure a solid reliable connection between the 4K HDMI HDBaseT Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors.

Note: Shielded, solid conductor Cat6 or HDBaseT Certified Cat6a network cabling is recommended for applications where the category cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments.

Specification

Product
Product id	942123
Brand	C2G Cables To Go
Partnr	C2G30055
EAN/UPC code
Warranty (months)	5 Jahre
Features
Type	AV transmitter & receiver
Maximum resolution	3840 x 2160 Pixels
Cable types supported	Cat5e, Cat6, Cat6a
Chipset	VS210
Maximum transfer distance	100 m
Electrostatic Discharge (ESD) protection	8 kV
Electrostatic Discharge (ESD) protection	Y
HDCP version	2.2
LED indicators	Y
Bandwidth	18 Gbit/s
HDCP	Y
Product colour	Black
Bandwidth	600 MHz
HDBaseT certified	Y
Ports & interfaces
Connectivity technology	Wired
Ethernet LAN	Y
RJ-45 input ports	2
RJ-45 output ports	2
HDBaseT port	Y
HDMI version	2.0
Number of HDMI outputs	1
HDMI in	1
USB ports quantity	5
USB version	2.0
USB connector type	USB Type-A, USB Type-B
Audio output	3
Audio input	1
Serial ports quantity	2
Serial interface type	RS-232
DC-in jack	Y
Power
Power source type	DC
Operating voltage	12 V
Input current	3 A
Power consumption (TX)	7.8 W
Power consumption (RX)	18.96 W
External power adapter	Y
Operational conditions
Operating temperature (T-T)	0 - 45 °C
Storage temperature (T-T)	-20 - 70 °C
Operating relative humidity (H-H)	10 - 90 procent
Weight & dimensions
Receiver dimensions (W x D x H)	210 x 90.2 x 25 mm
Receiver weight	460 g
Transmitter dimensions (WxDxH)	89 x 105.6 x 38.4 mm
Transmitter weight	300 g
Packaging content
AC adapter included	Y
Cables included	AC, USB Type-A to USB Type-B
Included power plug types	AU, EU, UK, US
Manual	Y
Mounting brackets included	Y
Technical details
Sustainability compliance	Y
Sustainability certificates	REACH, RoHS