- The Cisco ASR 1000 Series Embedded Service Processors (ESPs) are based on the innovative, industry-leading Cisco QuantumFlow Processor for next-generation forwarding and queuing in silicon. These modules use the first generation of the hardware and software of the Cisco QuantumFlow Processor architecture.

- The 5-, 10-, 10-N- 20- and 40-Gbps Cisco ASR 1000 Series ESPs (part numbers ASR1000-ESP5, ASR1000-ESP10, ASR1000-ESP10-N, ASR1000-ESP20, and ASR1000-ESP40, respectively) provide five centralized forwarding-engine options for the Cisco ASR 1000 Series Aggregation Services Routers. Additionally, the Cisco ASR 1002 Fixed Router includes a nonmodular, fixed ESP with throughput of 2.5-Gbps and the ASR 1001 comes with a nonmodular, fixed ESP with throughput of 2.5-Gbps which is upgradable with a software activated performance upgrade license to 5-Gbps.

- The Cisco ASR 1000 Series 10-N-Gbps ESP (ASR1000-ESP10-N) is the nonencryption version of the Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10). The Cisco ASR 1000 Series 10-N-Gbps ESP can only support noncrypto Cisco IOS Software images and will never support encryption capabilities such as IP Security (IPsec). In future releases, the Cisco ASR 1000 Series 10-N-Gbps ESP may support secured network management features such as Secure Shell (SSH) Protocol, Secure Sockets Layer (SSL), and Simple Network Management Protocol Version 3 (SNMPv3).

- The Cisco ASR 1000 Series ESPs are responsible for the data-plane processing tasks, and all network traffic flows through them. The modules perform all baseline packet routing operations, including MAC classification, Layer 2 and Layer 3 forwarding, quality-of-service (QoS) classification, policing and shaping, security access control lists (ACLs), VPNs, load balancing, and NetFlow. They are also responsible for features such as firewalls, intrusion prevention, Network Based Application Recognition (NBAR), Network Address Translation (NAT), and Cisco IOS Flexible Pattern Matching.

Specification

Product
Product id	244302
Brand	Cisco Systems
Partnr	ASR1000-ESP10=
EAN/UPC code	882658180880
Internal memory	2560 MB
Dimensions (WxDxH)	0.02 x 0.428 x 0.36 mm
Slot type	2.5/5 - Gbps ESP
Power consumption (typical)	140 W
Security algorithms	3DES, DES, SSH, WPA-AES
Rack mounting	N
Full duplex	Y
Operating altitude	-60 - 2000 m
Operating relative humidity (H-H)	5 - 85 procent
Storage temperature (T-T)	-40 - 70 °C
Memory and processor	512-Mbps Cisco QuantumFlow, 2-Gbps DRAM, 10-Mbps TCAM, 128-Mbps
Operating temperature (T-T)	5 - 40 °C
AC adapter included	N
Dimensions (W x D x H)	0.92 x 16.7 x 14.19 "
Storage relative humidity (H-H)	5 - 95 procent
Non-operating altitude	-60 - 4000 m
Firewall security	IOS
Connectivity technology	Wired
Product colour	Multi
Mounting	R
Operating temperature (T-T)	41 - 104 °F
VPN tunnels quantity	10000
DC-in jack	N
MAC address filtering	Y
Maximum data transfer rate	10 Gbit/s
Wi-Fi	N
Quality of Service (QoS) support	Y
Web-based management	Y
Connectivity LEDs	6
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Firmware upgradeable	Y
Built-in processor	ASR1000-ESP10
I/O ports	Cisco ASR 1000 SIP - SPA
Management protocols	SNMPv3
Safety	AS/NZS 60950 / IEC/EN 60950
Compatibility	Cisco ASR 1002, ASR 1004, ASR 1006
Networking standards	IEEE 802.3
Compatible operating systems	Cisco IOS XE 2.1